Carpet looks dirty after cleaning? Actual reason for this.

Rate this post

Do you ever notice that your carpet looks dirty after cleaning?. If so, there is no reason to worry. This problem occurs when a carpet is cleaned using shampoo and the old method, and the carpet looks dirty even after cleaning.

Or, If asked, how many times a year do you clean your carpet? Maybe you say once. This is what all people usually do. They clean their carpets once a year.

If you can’t clean the carpet yourself then maybe hire a professional. When the work is done you may hope that the carpet will be clean. But often that is not the case. Many have complained that their carpet looks dirty and bed odor come out even after professionals have cleaned them.

Why your carpet looks dirty after cleaning?

carpet looks dirty after cleaning

There are two fact that could be the main reason for looking carpet dirty after cleaning. They are,

Wicking: Dirty stains are usually seen after cleaning the carpet due to the wicking under the carpet fibers. In this case, the original stain stains the carpet fibers and penetrates the deeper pads of the backing.

Hoping to get rid of stains and dirt, the carpet may have had too much moisture when it was washed. Or you may have used a lot of water to clean the carpet. As a result, more water enters the carpet’s backing and pads, resulting in saturation. And the carpet faded and got dirty with water stains.

Although the dirty water is thrown out after cleaning the carpet, most of the water remains on the backing and pads. As the moisture evaporates and the carpet dries, the dirty water rises into the carpet fibers. This allows the deeper stain to become visible on the top surface of the carpet.

Residue: When the carpet is particularly dirty and has recently been cleaned, stains that return due to residue come from inside the carpet fibers itself. Some of the detergent, shampoo, or other cleaning chemicals used in the typical cleaning process may have been left behind in your carpet in such circumstances. As a result, even after the carpet has dried, the residue will remain.

Dirt and filth are attracted to soap and shampoo residue because it is sticky. This is especially noticeable in high-traffic areas because soil from shoes adheres to the residue in the carpet strands every time someone walks on them.

Similarly, any settling residue will cling to the carpet residue.
This explains why carpets cleaned with typical procedures soon become re-soiled. Even vacuuming the carpet will not remove the soil that has become attached to the residue within the fibers.

The same places will emerge again, but the truth is that new soil becomes trapped to the residue within the carpet strands.

These are the primary reasons why your carpet looks dirty after cleaning. Wicking is the most common cause of spots and stains that appear as soon as the carpet dries. Simply put, wicking occurs when the carpet, backing, and pad are too moist.

Excessive soap residue is the most frequent cause of stains and blotches that occur a few weeks after carpet cleaning. If you can’t get rid of the residue or wicking on your own, professional carpet cleaning services may be able to help you reap the benefits of carpet cleaning.

Why does your carpet looks dirty after shampooing?

When the carpet is particularly dirty and has recently been cleaned, stains that return due to residue come from inside the carpet fibres itself. As a result, even after the carpet has dried, the residue will remain. Dirt and filth are attracted to soap and shampoo residue because it is sticky.

Why did your carpet turned brown after cleaning it?

After a carpet cleaning, brown coloured stains are common. These stains appear when a large amount of cleaning solution and water is used during the cleaning process. Another explanation for these brown coloured stains is that when the rug dries, soil that was previously hidden in the rug resurfaces. Wicking is the term for this process.

Other reason for looking carpet Worse After Cleaning

There are also some common mistake that is the reason for looking a carpet worse after cleaning. Though this article, you will know why your carpet looks dirty even after cleaning and how you can get rid of this problem.

There are numerous issues that cause the carpet to look dirty even after washing. They are,

  • vacuuming carpet before steam cleaning.
  • using detergent when cleaning with steam.
  • Spraying detergent powder on the carpet before cleaning.
  • Mishandling the carpet.
  • Using too much water.
  • Using low quality carpet.
  • Erosion of the protective coating.
  • DIYers trying to clean carpet.

1) vacuuming carpet before steam cleaning.

vacuuming carpet before steam cleaning.

When steam cleaning a carpet, there is a certain technique that must be followed. The carpet can become dirty if the instructions are not followed correctly. Normally, the carpet must be vacuumed before the steam begins to clear. This is due to the fact that carpets accumulate a lot of dust and must be removed.

So, if you don’t vacuum before you start steam cleaning, dust will gather once the carpet dries.

2) Using detergent when cleaning with steam.

Using a Cleaning Sollution

The rules of cleaning everything are not the same. Some people fail to remove the oily substance from the carpet. As a result, they try to extract these oily substances in different ways.

But if someone uses a method that is not suitable for lifting oily substances, the oil substance will remain in the carpet, making it appear dirty after cleaning. So becareful about using any method. Because, the slightest mistake can ruin the color of your carpet.

3) Spraying detergent powder on the carpet before cleaning.

Pre-Spraying Detergent Onto the Carpet

Some carpet cleaners use detergent when cleaning carpets but many do not. According to the research, ❝mixing detergent with cleaning solution will leave a lot of detergent on the carpet after cleaning.❞ This makes the carpet sticky and collects dust and sand like a magnet.

As a result, before cleaning the carpet, detergents should be sprayed on it. Spraying the cleanser ahead of time will ensure that it is picked up during the cleaning procedure. This also allows the detergent to breakdown grime before the steam cleaning process begins.

4) Using too much water

Using too much water

Water is required for the cleaning process to be finished. When there is too much water on the carpet, it soaks through the fibers and reaches the jute backing. The carpet looks to be colorless as a result of this. Furthermore, once the job is finished, surplus water is difficult to dry off.

5) Mishandling the carpet

Carpet cleaning with hand

You may do things in your daily routine at home that contribute to the messiness of your carpet.

When you walk on the carpet, for example, you almost certainly wear shoes. This easy action will track dirt from the outside onto the carpet. To avoid this, many professional carpet cleaners recommend that you should remove your shoes before entering your home.

6) Using low quality carpet

Using low quality carpet

Carpets can be created in a number of different ways. Carpet for commercial use differs from carpet for domestic use. Low-level loops with a tight structure are popular in commercial carpet. It also contains a greater percentage of olefin fibers.

Olefin is the generic term for polypropylene, a synthetic fiber with unique qualities not seen in other carpet fibers. It is easily soiled and does not last as long as other carpet fibers. Because the soil enters beneath the loops and into the carpet, it becomes trapped. Once you’ve become stuck, it’s difficult to get out.

The problem grows significantly worse when the carpet is vacuumed often. The vacuum cleaner captures larger soil particles, while the fibers hold the smaller ones. The filth particles build up, dulling the carpet’s appearance.

When a carpet is professionally cleaned, some soil is pulled to the surface, but it remains in the carpet. As a result, the carpet seems dirty even after washing.

7) Reappearing Stains

Reappearing Stains

Spilling a drink or food on a carpet is a typical occurrence. If the stain is not removed as quickly as possible, it may reappearance after a carpet cleaning. Soiling or wicking are two methods for accomplishing this.

When a remnant from a carpet cleaning remains on the fibers, it is referred to as soiling. If the spill is not wiped and blotted sufficiently, the residue will remain sticky, collecting dirt and soil to the same spot. As a result, the original stain appears to have reappeared.

Wicking occurs when a spilled material soaks into the floor covering’s support or, in certain cases, the underpad. When you clean the spill, you’re only cleaning the outer layer of the rug; you’re not getting down to the buildup trapped in the floor covering’s support or under the cushion.

The buildup in the sponsorship and underpad is reabsorbed into the strands of the rug and reappears on the surface when the floor covering is cleaned later.
Wicking occurs when the floor covering is wet during the cleaning process, especially when high-temperature water or steam is used to remove soil. Because the steam-cleaning equipment isn’t powerful enough to catch all of the water in the rug’s threads, some water is left behind.

8) The Erosion Of Protective Coating

Carpet Protective Coating

Many carpets include a protective layer that keeps dirt and spills from penetrating the carpet, allowing them to be wiped away with a damp towel.
The carpet might degrade over time as a result of foot usage. The cleaning process can also harm it.

9) DIYers trying to clean carpet.

DIYers trying to clean carpet.

Perhaps you’ve tried to perform a comprehensive carpet cleaning yourself, or you’ve witnessed the results of a friend’s DIY cleaning attempt.

You’ll need to rent a carpet cleaning machine if you want to do the job yourself. Some machines are designed to clean lightly soiled floor coverings, while others are limited in their ability to handle specific carpet shapes and fibre kinds.

Some of these devices may use far more water and have significantly less features than a professional carpet cleaner’s unit. As a result, the water and cleaner are driven deep into the floor covering, and the machine isn’t powerful enough to extract the water from carpet.

How to prevent carpet from being dirty after cleaning?

prevent carpet from being dirty

Many of the concerns listed below can be avoided with routine maintenance, proper spot cleaning, and hiring a good professional rug cleaner to clean your floor covering on a regular basis.

Avoid wearing shoes on your floor covering to ensure that it remains spotless. From the outside, this will prevent soil from adhering to your floor covering.

Vacuum the rug on a regular basis to prevent residue and soil from building up in the filaments.

Don’t burn through any time if food, alcohol, or any other substance gets on the floor covering. Clean the affected area as soon as possible.

Do some research before cleaning to learn how to properly detect and clean the substance on the floor covering. If you are schooled in dealing with these emergencies, you may be able to prevent any of the issues depicted below from occurring.

Last word about this article

I tried to share all the things about this topic in this article. Hope you got your question’s answer. If you like this, then you can share it. Also If you have any problem, let us know in comment box. We will back soon with a new tutorial.

Sharing Is Caring:

Leave a Comment