HowInstead of spending a lot of money on a hardwood floor that needs to be refinished every few years, consider a modern vinyl plank flooring option. This option provides a number of alternatives to the more expensive hardwood option, but if you are more familiar with wood, you may have questions about it. How to cut vinyl plank flooring is a commonly requested question.
Vinyl plank flooring is a simple and straightforward material to work with. Cutting the material to size does not necessitate the use of any special tools. A laminate tile cutter, hand saw, table saw, circular saw, miter saw, jigsaw, or Dremel are some of the cutting instruments you can utilize. A utility knife is the most common instrument.
Vinyl flooring is easy to install because it is lightweight and comes in tongue and groove planks. The planks are made to look like wood plank flooring and are usually coated in a wood design. The vinyl planks, on the other hand, aren’t as thick as wood planks and at first appear weak. This begs the challenge of how to cut this material without causing damage or leaving ugly edges.
On the other side, The simplest types of flooring to install is vinyl plank flooring. And if done correctly, it can make you look like a million bucks while being inexpensive!
However, you’ll need to be able to trim it neatly to size in order to achieve that ideal finish. It’s not difficult, but if you’ve never done it before, a few basic strategies can save you a lot of time and aggravation.
We’ll take a step-by-step approach to cutting vinyl plank flooring. We’ll also offer some advice on how to get a professional appearance.
Do you want to learn more about it? Let’s get started!
Tools For Cutting Vinyl Plank Flooring.
Vinyl plank flooring is commonly referred to as LVP or LVF and is installed using a tongue-in-groove system, also known as click-lock. Because of the vinyl’s lightweight composition and tongue-in-groove edging, deciding how to cut this material can be difficult.
Some people worry about rough edges, tongue-in-groove edging, and even cracking or splitting vinyl planks.
One of the appealing features of vinyl plank flooring is that it is simple to install and does not necessitate the services of a professional vinyl flooring installation. Installing the material is a simple weekend effort that can be completed by anyone.
Before you started cutting vinyl plank flooring, you need some tools and equipments that will help you to cut properly. These are the tools that will help you,
- Tape measure
- Framing square
- Pencil (or chalk, if your vinyl planks are a dark shade)
- Safety goggles
- Utility knife
How to cut vinyl plank flooring?
In order to cut vinyl flooring properly, follow bellow steps carefully. You will get a clear concep on cutting vinyl flooring.
Step 1: ❝Determine What Kind Of Cut You Need To Make❞ The technique you’ll require will be determined by the direction of the cut you’ll be making. You can use the scoring process to shorten your vinyl plank. This is something you’ll have to do a lot to get a plank at the end of a row. However, the width of your plank may need to be reduced. Along the longest walls, this will be required frequently. You’ll need a jigsaw for this because it will require cutting a much longer length of board.
Tips: Before you begin, sketch out the plan of your floor to identify where you’ll need to make cuts. Make sure you’re not going to have to chop a plank down to half its original width. Narrow planks are fragile and prone to splitting. To avoid this, cut the boards at both ends of the room rather than just one.
Step 2: ❝Measure And Mark Your Cut❞
You’re ready to mark your cut line now that you know which approach you’ll employ. Using your pencil or chalk, measure the distance along the board and mark it on the top surface. Then set your framing square in place. You want the horizontal side of the plank to be parallel to the side you won’t be cutting. The chalk or pencil mark on the vertical side must match the mark on the horizontal side.
Draw a line through the mark using your pencil or chalk. To get a straight edge, draw down the side of the framing square. Your line will be perpendicular to the plank’s edge that will not be cut.
Placing the plank on the floor can also be used to mark the location of your cut. Then, where the preceding plank ends, draw a line. Just remember to account for the required expansion gap.
Step 3: ❝Score Your Cutting Line❞
It’s now time to score your cutting line if you’re using the score-and-snap approach. Remember, this approach should only be used for making quick cuts, such as chopping off the end of a plank.
Begin by ensuring that the plank you’ll be cutting is properly fastened. Placing it on the floor and resting your knee on top is one of the simplest methods to achieve this. Place a spare piece of flooring underneath the board you’re intending to cut if you do this.
Your floor will not be harmed as a result. You can also set the wood on a tabletop or workbench with your hand.
Place one edge of your framing square along the top of the plank. The opposite edge should be aligned with your cutting line. To keep the square in place, put your non-dominant hand on top of it. (If you’re a right-handed person, this is your left hand.)
Now hold your pocketknife and run it across the cutting line carefully. You don’t have to press too strongly; the goal is to cut the plank about halfway through. To make a deeper groove, run the blade down the cutting line a second or third time if necessary.
Tips: Here’s a quick trick for keeping your frame square steady when cutting. Place your thumb closest to the cutting edge – but not too close, as we don’t want any injuries! Apply gentle pressure with your fingers along the top part. As you use the utility knife, this will keep it steady.
Step 4:(For Shorter Cuts Only) ❝Snap Off The Cut Section❞
Now it’s time to flip the plank. The larger part, like before, should be weighed down. If the plank is on the floor, you can use your knee. Lean on it with your non-dominant arm if you’ve put it on a workbench or a countertop.
In your dominant hand, grasp the end of the plank you want to snap. Grasp it and pull it up to your face. It should be able to be snapped off with ease. Don’t tug if it doesn’t crack right away; you’ll risk splintering the plank.
Return the plank to its original position. Now, using your framing square and utility knife, score the cutting line once again to make a deeper groove. Then flip the plank over and try again, weighing down the longer end.
Tips: Wait until you’ve done laying your floor before discarding your chopped parts. They might be useful towards the end of another row.
Step 5: (For Longer Cuts): ❝Secure Your Plank For Cutting❞Clamp the board in place on top of a workbench if you have one. You can also place it lengthwise along the edge of a table or countertop. Clamp the plank to the bench or counter so that the section you’re going to cut off extends over the side.
Your jigsaw blade will need to be able to move underneath the cut line. As tight as the clamps will go, make sure they’re twisted. Put on safety eyewear because the jigsaw can spit out small pieces of vinyl and board as you cut.
Tips: You can skip the clamps if you’re comfortable with a jigsaw. Instead, use your non-dominant hand to press down on the plank and secure it.
Step 6: ❝Cut Along The Line With The Jigsaw❞ Place the smooth plate on top of the plank with the jigsaw. With the teeth facing away from you, you want the blade to be at the start of the cut line. The jigsaw will move away from your body as you cut.
To start your jigsaw, place both hands on top of it and pull the trigger. The blade will just travel up and down on the jigsaw, so you’ll have to push it in the direction you wish to cut. Avoid driving the blade through the wood and do it gradually to maintain it lined up with your cutting line.
Hope you understand how to cut vinyl plank flooring in different way and shape.
★ How to cut vinyl plank flooring around corners?
Are you interested in installing vinyl plank floorings in your home? When it comes to hygiene and durability, they are the obvious choice. You can also select from a number of other designs or patterns. They are, in general, a fantastic option.
So, kudos to you if you’re thinking about installing vinyl plank flooring, You’ll need to know how to cut vinyl plank flooring around corner, though. You’ll have to make a few cuts here and there to fit them on the corners.
That’s what this article will teach you. Wait until the conclusion to see what happens.
#1 Tools for Cutting Vinyl Plank Flooring!
There are some tools that you will need to cut vinyl plank flooring properly.
- Measuring tape
- Utility knife
- Electric jigsaw or circular saw
- Marking pen
- Chalk line
#2 Plan for corners
Plan ahead of time before you start working. You should think about how you’ll approach the corners. Set aside a few planks solely for corner use. This way, when it comes to flooring the corners, you won’t have any troubles.
#3 Measure the area
The corner areas must then be measured. You’ll cut your vinyl planks based on that information. As a result, be certain to take the appropriate measurements. If you need to retain any gap count, you can use the measuring tape to take measurements in the corner sections.
#4 Determine the corners’ shape
This is a crucial step since many people overlook the shape of the corners and make mistakes as a result. There is no going back once you’ve cut the planks. As a result, you must ensure that the shape you’re cutting is correct and that the corners are straight. You must first identify the corner’s shape, which you may do by cutting out the exact shape of the corner with a sheet of paper.
#5 Use a T-square to mark the plank
To demarcate the table, you’ll need to use the t-square. A T-square can be used to precisely measure corner angles. It also helps in the even cutting of the boards.
#6 Make the environment clean and safe
Take a moment and tidy up the area around you. All that’s left now is to cut the planks appropriately after you’ve marked them. So put everything you don’t need for cutting the planks away.
#7 Ensure the vinyl is stable using clamps
Because vinyl planks will move around a lot, cutting them can be challenging. You’ll need to make sure the planks stay solid because you’ll need precision in your cutting. Clamps can be used to hold the boards in place while ensuring their stability. Only keep the exterior surface of the part you’ll be cutting.
#8 Cut corners using a jigsaw
Jigsaws are the most effective instrument for cutting corners. It has the ability to chop down small pieces with precision and convenience. Simply insert the jigsaw into the board by a small incision on the mark. After that, begin cutting along the plank’s mark. To achieve smoothness around the borders, try to cut in single motions. Simply avoid damaging the plank’s groove layer.
Examine the smoothness once you’ve trimmed down. You can use the utility knife to polish the edges if you believe they should be smoother. Don’t go overboard, though.
#9 Check it fits well in the targeted areas
Finally, make sure the planks are the right size for the spaces. If they aren’t, you’ll need to make a few minor tweaks to ensure that they fit properly in the designated spots. Pliers or knives can be used to do this.
That’s how corner vinyl planks are cut. It isn’t that tough, as you can see. You just need to pay attention to the measures and you’ll be able to cut vinyl plank flooring around corner.
You can see this tutorial for practical tutorial👇
★ How to cut vinyl plank flooring around toilet?
There are many way that can be used to cut vinyl plank flooring around toilet. But I am now discussing about some tried and proven way that will help you to cut vinyl plank flooring around toilet properly. Follow bellow steps carefully.
#1 Laying the Underlay
Begin by laying the underlay and measuring your toilet’s round shape before cutting one half from one piece and the other half from another. Tape the two sections together around your toilet so they fit against each other. Ensure that the underlay is not overlapping.
#2 The floor
Trace the outline of your toilet on a large piece of paper. Check that the toilet paper fits snugly around your toilet. You’ll need to use tape to keep it in place here as well. This will also show you how far your toilet is from the last row of planks you put down on the paper. Make a cut where the flooring you placed ends on the paper.
#3 Trace on the Paper
Trace the toilet on the paper with your pencil. You’ll trace the shape of the toilet onto the boards using this tracing.
#4 Placing the Planks
Make sure the surface is large enough to fit your toilet by clicking a few planks together. For added stability, add a couple extra planks. Tape the piece of paper to your planks in the appropriate location.
#5 Trace on the Plank
Trace the lines on the wood where your toilet will go using a pencil.
#6 Cut Out the Shape
Using a knife, carefully cut out the outline of the line you drew on the plank. After that, you can insert your toilet into the cut-out you made with the knife.
#7 Sealing the Toilet
Apply elastic silicone to the base of your toilet to seal it and prevent moisture from leaking out.
You will have successfully fitted vinyl plank floor tiles around your toilet if you follow the steps above!
★ How to cut vinyl sheet flooring?
Using a sharp utility knife and a straight edge is the ideal way to cut a vinyl sheet flooring. Cut the sheet to suit the room’s edges and around any impediments, such as columns, leaving a 1/8″– 1/4″ expansion gap. Check that the sheet is square to the room before making any cuts. Your new floor’s appearance would be ruined by a crooked or skewed design.
★ Can You Use Tile Cutter To Cut Vinyl Plank Flooring?
You may already have a tile cutter in your shop that you can use to cut your vinyl plank flooring.
You can use a tile cutter, but the type of tile cutter you have will determine how well it works. You’re out of luck if you’re using a ceramic tile cutter. A diamond-edge cutter is used to score the ceramic tile along the cut line with a ceramic tile cutter. It scores the tile’s surface rather than cutting into it.
This is enough to create a fault line in the ceramic tile along which it will crack cleanly and break away from the remainder of the tile without cracking the rest of the tile.
For vinyl plank flooring, this sort of tile cutter does not cut deep enough into the material, and the diamond edge on a ceramic tile cutter is not a sufficient cutting edge for the vinyl material.
If you have a laminate and vinyl tile cutter with a razor-sharp, guillotine-style blade, this type of tile cutter is ideal for cutting vinyl planks. This powerful blade’s guillotine movement will totally cut through the vinyl board. If it doesn’t go all the way through the backing, a utility knife can be used to trim it through.
★ Can You Use A Saw To Cut Vinyl Plank Flooring?
Cutting vinyl planks with a hand saw is possible, but you should avoid using a rip saw, which is designed to cut through tough wood. You’ll need a saw with fine teeth that won’t damage the vinyl’s edge and will cut cleanly. A finish cut saw or even a hacksaw has fine enough teeth to cut through the material and leave a flawless edge after the cut.
Because the teeth on the saw are built to make this type of cut on wood as well, a flush cut pull saw will likewise generate a clean and smooth edge on the vinyl following the cut.
While cutting vinyl planks with a saw is doable, it is far more time-consuming than other, faster and easier alternatives. When cutting vinyl planks with a handsaw, the time it takes to lay the flooring will be significantly increased. As a result, it is not the most efficient approach to cut these boards, but it will suffice if you have no other choice; the process will only take longer.
★ Can You Use Table Saw To Cut Vinyl Plank Flooring?
When cutting vinyl planks, a table saw can be a very useful instrument, especially when executing a rip cut. A rip cut is when you cut the planks along their entire length. This would primarily be done where the vinyl planks’ long edges contact the wall.
A full-width vinyl plank cannot always be installed between the second last board and the wall on a floor installation. You’ll need to trim the plank down along its length in this case. The table saw will come in help here since it can sustain the length of the board as it is being pushed through the saw.
Rip cuts aren’t the only way to cut this material using a table saw. You may also use the table saw to make crosscuts in your vinyl planks. When you need to shorten the length of a board, you’ll need to use a crosscut.
Where the planks meet the opposite wall at the top or bottom of the boards, you’ll need to shorten them. This is especially beneficial if you’re staggered the boards to mimic a staggered wood floor or if you need to shorten the length of the planks to accommodate obstructions in the way.
You’ll need to replace the blade of your table saw to a fine-tooth blade if you’re cutting vinyl boards. Blades with a low tooth per inch (TPI) count will often cut more roughly than blades with a higher TPI count. The high TPI blades will cut the vinyl planks smoothly, allowing for easy installation while not roughing up the edges.
Cutting vinyl planks requires careful consideration of the rake angle of the teeth on the table saw blade. A positive rake angle table saw blade will cut more aggressively than a blade with a zero or negative rake angle.
★ Can You Use Miter Saw To Cut Vinyl Plank Flooring?
A miter saw is a handy tool for cutting vinyl planks, but it’ll only work for certain cuts. A miter saw works similarly to a table saw, with the exception that the blade is moved down into the material rather than the material being pushed into the rotating blade.
The type of cuts you can make on a vinyl board are limited by the design of a miter saw. It’ll be ideal for cutting angles into the ends of boards to lay them around obstructions and making crosscuts to shorten vinyl planks.
A rip cut is the only cut that a miter saw cannot make on vinyl planks. The blade cannot be run along the length of a board or plank due to the saw’s design. Even in its typical purpose for cutting wood, a miter saw is only designed to be used as a crosscut saw.
As a result, a miter saw will perform wonderfully as a crosscut saw on your vinyl planks, but if you need to do longitudinal rip cuts, you’ll need to use one of the other cutting methods available.
The miter saw’s blade that you use will affect the cut as well. To make the cuts cleaner and smoother, use a blade with a high tooth-per-inch count, just as you would with a table saw.
A miter saw’s blades are usually zero-rake or negative-rake angle blades. Climb cutting or self-feeding, where the blade draws the workpiece into the blade, is avoided with these blades on miter saws as a matter of course.
★ Can You Use Jigsaw To Cut Vinyl Plank Flooring?
A jigsaw is an excellent tool for cutting vinyl boards. A jigsaw gives you more options when it comes to the types and forms of cuts you can make on the boards.
The right blade is essential for cutting vinyl planks with a jigsaw. Jigsaw blades for various materials can be obtained, and they are generally not particularly expensive. Jigsaw blades are typically designed for wood and give an aggressive cut.
You’ll need a jigsaw blade that’s less harsh and has finer teeth for cutting vinyl boards. The fine teeth will provide a smooth cut that will not damage the plank’s edges. When it comes to versatility, the jigsaw is perhaps the greatest tool for cutting vinyl floor planks because it allows you to complete all of your cuts with only one tool.
When doing rip cuts down the length of the vinyl planks, the jigsaw is most efficient when making smaller cuts and crosscuts, but it is a little slow when doing so. When you need to create cuts in the vinyl planks to fit around obstacles like door jams, pillars, basin pedestals, and the base of toilets, a jigsaw is the most useful tool.
The jigsaw is one of the most adaptable cutting tools for this particular flooring task since it can readily make these cutouts, even when cutting curves and unique forms and angles.
When your jigsaw blade is thin, it’s easier to cut out tight curves and shapes. Cutting tight angles and bends with wider blades is difficult. Cutting the boards with a jigsaw makes a mess, but you may simply solve this problem by cutting over a trashcan or a bucket.
★ Can You Use Utility Knife To Cut Vinyl Plank Flooring?
The most typical equipment for cutting vinyl planks for flooring is a utility knife, often known as a box cutter. The board is scored with a utility knife, and the offcut portion is bent up to break the plank along the scoreline.
The score-and-snap method of cutting vinyl planks is what it’s called. This procedure works well and is widely used, but if done incorrectly, the break line after the snap may not be as clean as it would be if the plank had been cut.
If you’re going to cut your vinyl planks with a utility knife, make sure you get a nice one. The best tool for the job is one with a steel or wood handle, as you’ll need to apply a lot of pressure to dig deep enough into the plank.
It’s not a good idea to use a utility knife with a plastic handle or one with snap-off blades. These types of utility knives may break if you apply the pressure required to score the planks, and you may cut yourself.
Last word about this Article
Vinyl plank flooring is a forgiving material to deal with, which is one of the reasons it’s a simple DIY project that any homeowner can perform without expert assistance.
Not only is the Viny plank material simple to work with, but it can also be cut without the need for special tools or equipment to cut the planks to the required size. Most homeowners have at least one, if not several, of the equipment we’ve recommended.
If you’re thinking about installing vinyl plank flooring in your home, look no further! The material is robust and waterproof, making it an excellent choice for a home with dogs and children. It also looks wonderful, so it will increase the value of your home without breaking the bank!